Correct use method of adjustable steel support
1. First use the handle to turn the adjusting nut to the lowest position.
2. Insert the upper tube into the lower tube to a height close to the desired height, and then insert the pin into the adjustment hole located above the adjustment nut.
3. Move the adjustable steel support to the working position, and use the handle to rotate the adjustment nut to make the adjustable support fixed to the supported object.
Precautions for the use of adjustable steel support:
1. The adjustable steel support should be placed on a flat bottom with sufficient strength;
2. The adjustable steel support should be installed vertically to avoid load as much as possible; when the height of the adjustable steel support exceeds 3.5 meters, it needs to be reinforced with fasteners and two right-angle or cross steel pipe locks.
Large bearing capacity, convenient height adjustment, simple support and disassembly. Leftover labor and materials. Under the same area of support, the amount of steel used in the adjustable steel support system is much less than that of steel pipe fasteners and bowl buckles, and the steel consumption is only about 30% of that of steel pipe fasteners and bowl buckles.
The adjustable steel support that integrates many advantages is very practical. If you need it, you can contact the adjustable steel support manufacturer. We welcome your inquiries.
